Harris Tool & Test Sets

Click for larger picture	Harris Test Sets & Equipment
	TS19 Test Set
	The Harris TS19 test set combines all the basic test set features at an incredible price. This test set was specifically designed for in-house telecom technicians. Its high impedance monitor prevents accidental disruption of service from clipping onto a data line while in Monitor mode, thus ensuring the integrity of critical data lines. Features such as Tone (DTMF) or Pulse operation, Talk.Monitor capabilities, polarity test button and last number redial make this test set the prefect combination of features and price. Supplied with angled bed-of-nails clips.
	Stock # 19800-009 ...Click here for prices or to order.
	TS30 Test Set
	Recognized as the new industry standard, the TS30 test set provides superior quality at an affordable price. With its high impedance Monitor for DataSafe operation, technicians can dip onto a line in Monitor mode, without disrupting existing traffic. Harris' unsurpassed RainSafe protection standards and DropSafe durability assures the test set will keep working, even in the toughest environments. New weather proofing provides enhanced resistance to severe weather conditions. Supplied with angled bed-of-nails clips.
	Stock # 30800-009 ... Click here for prices or to order.
	TS100 Cable Fault Finder
	This easy to use, competitively priced cable management solution saves time and money while it simplified many common task. It's the fastest tool available for measuring the distance to open and shorts, (even intermittent faults., because the unit measures constantly when "on") -- all from one end of the cable. It lists results as a distance reading rather than as a waveform, so it's perfect for technicians unfamiliar with Tim Domain Reflectometery (TDR) technology. its digital readout is perfect for inventory management since it can measure the length of cable on a spool. Supplied with BNC to banana bed of nails.
	Stock # 26500-500 ... Click here for prices or to order.
	Pro2000 Tone & Probe Kit
	The Pro2000 Tone Generator and Probe provide a system that works with all types of wire and cable, including twisted-pair, multi-conductor cable, electric wire, speaker wire, coaxial, alarm cable and LAN cable. Without making direct metallic contact with the conductor, the Pro2000 probe provides precision tracing and identification of cable pairs. Designed to work together, the tone generator and probe can be safely stored in the handy pouch included in the kit.
	Stock # 26000-000 ... Click here for prices or to order.
	Banjo Modular Adapter
	The Banjo Modular Adapter permits testing on working lines without disruption service and helps determine whether the trouble is in the phone or in the line. This unit works like the Harris Standard Modular Adapter, but has the added feature of replaceable test leads.
	Stock # 10210-100 4 Wire Banjo Adapter (In-Line) Click here for prices or to order. Stock # 10220-100 6 Wire Banjo Adapter (In-Line) Click here for prices or to order.
	Pro-Tool IS50 Tool Set
	The IS50 Pro-Tool kit includes the most essential tools for electric and telecom technicians in the most compact pouch available. These are the D914S impact tool, the electricians's D-Snips, cable stripper, and Eversharp 66/110 cut blade.
	Stock # 11292-000 ... Click here for prices or to order.
	Impact Tool D814
	The D814 Impact Tool is a unique all-in-one punch-down tool that enables installers to make more efficient connections with much less effort than other wire termination tools. With a variety of interchangeable blades, the D814 impact tool is an essential part of an installer's tool pouch.
	Stock # 10054-000 D814 handle (only) Click here for prices or to order. Stock # 10055-001 D814 handle and 66, M110 & Free Blade Click here for prices or to order.
	Impact Tool D914
	The D914 Impact Tool combines torque and impact. Two versatile tools, the hook and spundger, are built into the handle. The hook has many uses including racing wires from a block or picking one wire from a bunch, The spundger tool is used for removing modules from Krone blocks without cutting or damaging them, The D914 impact tool uses the same interchangeable blades as the industry D814 impact tool, as well as the handy screwdriver and adapter blades. Look for the red and yellow color combination as your symbol of Harris quality.
	Stock # 10051-000 D914 handle (only) Click here for prices or to order. Stock # 10051-501 D914 handle and 66, M110 & Free Blade Click here for prices or to order.
	Impact Tool D914S
	The D914S Impact Tool provides better comfort and performance through a new ergonomic design. A soft rubber handle and rounded edges provide a better grip to reduce hand fatigue, especially while performing numerous wire terminations. It has all the same great features as the industry standard Harris D914 impact tool, works with all Harris industry standard blades, and is backed by a lifetime warranty.
	Stock # 10061-000 D914 handle (only) Click here for prices or to order. Stock # 10061-501 D914 handle and 66, M110 & Free Blade Click here for prices or to order.
	EverSharp Blades
	Harris introduces three new blades that feature improved durability. The EverSharp Dually M110/66 Cut Blade, the EverSharp M110, and the EverSharp 66. These blades fits the D914S, D914, and D214 tools and last three times longer than competing blades.
	Stock # 10056-000 EverSharp 66 Blade Click here for prices or to order. Stock # 10176-000 M110 Blade (not EverSharp) Click here for prices or to order. Stock # 10176-500 EverSharp 110 Blade Click here for prices or to order. Stock # 10178-600 EverSharp 66/110 Blade Click here for prices or to order.
	Coax Stripper
	Economical and versatile 2-level and 3-level stripper for RG58/RG59 and 62AU coax cable. Built-in Allen wrench adjusts blade depth.
	Stock # 11231-255 ...Click here for prices or to order.
	Multi-Level Coax Stripper
	Economical and versatile 2-level stripper for RG59, RG6, RG6 Quad coax cable. Built-in Allen wrench adjusts blade depth.
	Stock # 11231-257 ... Click here for prices or to order.
	Electrician's D-Snips
	D-Snips offer a unique ergonomically-designed handle that leverage your power, providing 1-1/2 times the cutting force with half the effort. The special "tail" on the handle that provides the added leverage also minimizes hand fatigue. Cuts are faster, cleaner and safer. Blades have file and scraper on both sides for cleaning wire; one blade is notched for non-slip stripping of 19- and 23-gauge wire. Blades are also serrated for non-slip cutting. Made of high-quality forged steel these D-Snipes are durable time-savers.
	Stock # 44300-000 ... Click here for prices or to order.

Other Harris products are available on special order.